Arabic (UAE) 
HI53D HD-SDI Multiplexer To HDMI 1.4a and SDI Vid/Aud Mini-Converter
SKU
HI5-3D
AJA's HI53D HD-SDI Multiplexer To HDMI 1.4a and SDI Vid/Aud Mini-Converter converts SD or HD-SDI to HDMI for driving HDMI monitors. Embedded audio is supported in the HDMI output allowing a convenient single cable audio/video connection.
AJA's HI53D HD-SDI Multiplexer To HDMI 1.4a and SDI Vid/Aud Mini-Converter converts SD or HD-SDI to HDMI for driving HDMI monitors. Embedded audio is supported in the HDMI output allowing a convenient single cable audio/video connection. The Hi5 provides 2-Channel RCA style audio outputs for separate audio monitoring if needed. The Hi5 also provides a looping SD/HD-SDI output useful for connecting additional equipment, or for "daisy chaining" multiple monitors to the same source.
The Hi5-3D supports, depending on the video format, "side-by-side", "top-bottom", and "frame-packing" 3D modes. The "side-by-side" and "top-bottom" modes involve compressing, either horizontally or vertically, each input for combining into a single video stream at the same rate of the inputs. The "frame-packing" mode stacks two full resolution inputs into a "tall" frame (at twice the clock and line rates). When selected, "frame-packing" can only be used with 23.98/24Hz input frame rates.
Each input, in addition to 3D processing, can be flipped either horizontally, vertically, or both. This control is provided by 4 switches that can be engaged in any combination.
The Hi5-3D works with both 2D and 3D inputs. When in the 2D mode, the input is simply passed to the output unmodified. In the 3D mode, the Hi5-3D supports the minimum required 3D modes as defined by the CEA for HDMI 1.4a televisions.
CEA Required 3D modes:
2xSDI 1.5gb 720p50/59.94/60 T/B
2xSDI 1.5gb 1080p23.98/24 T/B, FP
2xSDI 1.5gb 1080psf23.98/24 T/B, FP
2xSDI 1.5gb 1080i50/59.94 S/S
"psf" inputs are converted to "p" for HDMI output. The SDI output can support S/S and T/B formats only. Future software versions may add other formats.
The Hi5-3D supports both DIP switch control and host control via the MiniConfig application. One of the DIP switches is a "Local/Remote" switch. When in the "Local" mode, the remaining dipswitches support a subset of the user controls. When in the "Remote" mode, AJA's MiniConfig application controls the unit. The last configuration is held in memory on the Hi5-3D for use when disconnected.
The Hi5-3D supports, depending on the video format, "side-by-side", "top-bottom", and "frame-packing" 3D modes. The "side-by-side" and "top-bottom" modes involve compressing, either horizontally or vertically, each input for combining into a single video stream at the same rate of the inputs. The "frame-packing" mode stacks two full resolution inputs into a "tall" frame (at twice the clock and line rates). When selected, "frame-packing" can only be used with 23.98/24Hz input frame rates.
Each input, in addition to 3D processing, can be flipped either horizontally, vertically, or both. This control is provided by 4 switches that can be engaged in any combination.
The Hi5-3D works with both 2D and 3D inputs. When in the 2D mode, the input is simply passed to the output unmodified. In the 3D mode, the Hi5-3D supports the minimum required 3D modes as defined by the CEA for HDMI 1.4a televisions.
CEA Required 3D modes:
2xSDI 1.5gb 720p50/59.94/60 T/B
2xSDI 1.5gb 1080p23.98/24 T/B, FP
2xSDI 1.5gb 1080psf23.98/24 T/B, FP
2xSDI 1.5gb 1080i50/59.94 S/S
"psf" inputs are converted to "p" for HDMI output. The SDI output can support S/S and T/B formats only. Future software versions may add other formats.
The Hi5-3D supports both DIP switch control and host control via the MiniConfig application. One of the DIP switches is a "Local/Remote" switch. When in the "Local" mode, the remaining dipswitches support a subset of the user controls. When in the "Remote" mode, AJA's MiniConfig application controls the unit. The last configuration is held in memory on the Hi5-3D for use when disconnected.
- HD-SDI to HDMI 1.4a with additional SDI output
- 10-bit HDMI 1.4a support including 3D and embedded audio
- Additional 2-channel RCA jack audio output
- Setup via DIP switch or PC/Mac using USB port and supplied USB cable (USB configuration software application supplied on CD)
Write Your Own Review