Mobile Viewpoint Playout 4C1 4 multicamera output HD-SDI; part of the WMT Multicam products

Playout 4C1
Request for Price

Product Highlights:

  • Receives and decodes up to 4 WMT streams simultaneously

  • 2U rack system

  • 4 channel (4 times stereo) balanced analog audio out

  • Automatic control of video encoding bandwidth based upon available bandwidth

  • Part of the WMT Multicam solution and utilizing the SDI playout system as the receiver

Mobile Viewpoint

The WMT playout portfolio make it possible to receive live video from any WMT system using broadband internet networks  The WMT outputs consist of 19 inch 1U or 2U high systems with two Ethernet connections providing next to video input also video output or video return.

The WMT decoders connect to the internet with just a single Ethernet connection. When the correct ports are forwarded in the firewall the signals of a WMT will come in and turned into a video signal. This video signal will exit the WMT decoders through a SDI video connection with embedded audio.

The systems supports both DHCP and ­fixed IP number confi­guration via the front LCD panel. The management interface is WEB based and makes it possible to confi­gure maximum bitrate, video resolution and delay. Also the IP con­figuration can be done via the web interface. This package includes a service providing access to the LinkMatrix where it is possible to manage and administer the terminal and connections to other WMT terminals.

The 4C1 decoder is a 2U rack unit. It has 4 audio inputs and outputs for intercom to overcome separate de-embedding. The 4C1 has 4 times HD-SDI outputs with embedded 8 audio channels of which 4-8 is the return audio from the intercom.

Manage & Control

In combination with the web-based platform the LinkMatrix it is possible to control, manage and administer all WMT devices and connections. The LinkMatrix is multi-destination and makes it possible to publish the same feed on many platforms including Social Media and private CDN’s.

Playout 4C1 - Specification

More Information
3.5 mm Jack IFB/Audio return
2 embedded audio channels; optional 8
2x USB
Optional SSD 2.5" sleeve
Choice of inputs:
1x HD-SDI, 1x HDMI, or
2x HD-SDI, 2x HDMI, or
4x HD-SDI, or
1x UHD-SDI, or
4x HD-SDI, 1x UHD, SDI
RECORDING:120 GByte internal, up to 1 TByte using optional sleeve
Simultaneously live streaming and recording in SD and HD
SD: High-quality CBR (Constant Bit Rate) in SD H.264 or H.265 up to 40 Mbit
HD: High quality CBR (Constant Bit Rate) in H.264 or H.265 up to 40 Mbit
INPUTS:SD; full D1
HD; 720p50, 720p60 and 720p59.94, 1080p25, 1080p30 (1080p50,1080p60 optional with special card)
HD; 1080i50, 1080i60 and 1080i59.94
SUPPORTED ENCODING:H 264 high profile MVP codec
H.265 main profile MVP codec
CONNECTIONS:8 Modems, LTE(4G), fallback 3G
Ethernet (optional 2)
Access via ethernet interface
IP MANAGEMENT:10/100/1000 Base-T (combined with second ethernet port)
HARDWARE:Dedicated appliance 12-24 Volt
Weighs approximately 1.7 kg
13.6 cm x 24.5 cm x 5 cm (wxhxd)
OPERATIONS SETTINGS:Live: Adaptive encoding and bitrate change with three options or with a slider (optional), with configurable delay between 0.8-60 seconds
Upload; send contents of a USB stick to an FTP server
Recording: CBR encoding at 30 Mbit on internal or external SSD disk
Satellite + 3G/4G + BGAN: Specific modes to optimize transmission over BGAN and KA band satellite. With Satellite + 3G/4G you can keep the delay at 1.8 seconds using 3G/4G modems for the return channel and IFB.
Standby/Data bonding: In this mode the unit is a true data bonding unit for high-speed uploads and internet access. In other modes data connectivity is available but live video gets prioritized.
PostPro license (optional): In this mode the system records next to a high-res CBR a low-res proxy file which can be used for remote editing and partial retrieve.
INCLUDES:Integrated antenna array
PSU 90-240 Volt AC to 19 Volt DC
AERIALS (OPTIONAL):Dome Antenna; omnidirectional antenna array 3 dBi
INPUTS:1x IFB or input (for audio return to the WMT™) upgradable
Microphone or line input
Ref input
Ethernet for connection to the internet
OUTPUTS:4 multicamera outputs on 1 HD-SDI
IP MANAGEMENT :Ethernet 10/100/1000 base-t
HARDWARE:Dedicated appliance 90-240 volt
2U rack system
Weighs approximately 2,1 kilograms
1U 19”rackmount
Power consumption average 80 watt
Redundant power supply on request
Write Your Own Review
You're reviewing:Mobile Viewpoint Playout 4C1 4 multicamera output HD-SDI; part of the WMT Multicam products
Your Rating