Sachtler System FSB 4 Fluid Head with Sideload Plate, Flowtech 75 Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet
Products Highlights :
- FSB 4 Fluid Head with Sideload Plate
- Head with Load Capacity of up to 8.8 Pounds
- For Small Camcorders, DSLRs & Mirrorless
- 5-Step Counterbalance
- Flowtech 75 Carbon Fiber Legs
- Two-Stage, Three-Section Standard Legs
- Tripod Supports up to 44 Pounds
- Height Range Approximately 24 to 61"
- Removable Mid-Level Spreader
- Padded Carry Bag
This Sachtler System FSB 4 Fluid Head with Sideload Plate, Flowtech 75 Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet supports cameras and accessories weighing up to 8.8 pounds, and is well suited for DSLRs, mirrorless cameras, and small camcorders. The head features a sliding balance plate with 4.7" of adjustment to balance your camera, 5 steps plus zero of counterbalance adjustment and 3 steps plus a zero setting of independent pan and tilt drag. This amount of adjustability combines to give you precise control of your camera on the head, and the ability to easily tune your set up on a shot-by-shot basis.
The Flowtech legs are a lightweight set of tripod legs that can be used with or without the included mid-level spreader. The legs support up to 44 pounds, which means they can easily handle the weight of the FSB 4 Fluid Head with Sideload plate as well as your camera and accessories. The legs extend from approximately two feet to five feet and are extremely resistant to twisting when you pan. Additionally, each leg features a single locking lever near the top that allows you to open the leg sections to raise or lower the leg. The included padded carry bag is for storing or transporting the head and legs.
Sachtler FSB 4 Fluid Head
With its 8.8 lb capacity and compact size, the Sachtler FSB 4 Fluid Head is ideal for supporting small handheld camcorders and video-enabled DSLRs. As the only head in its class to feature Sachtler's Sideload mechanism, the FSB 4 boasts an exceptionally large sliding range of 4.7". Along with a 5-step counterbalance, this ensures extremely quick and precise balancing. At the same time, no-compromise vibration damping allows for extremely subtle and finely graded movement.
Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet
The Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 7 pounds yet they can support a payload of up to 44 pounds, and extend from a minimum height of 24" to a maximum height of 61" when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.
Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground, and you can snap rubber feet onto the dual spikes for better grip when working on hard or delicate surfaces.
Features
Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head
With dimensions of 36.6 x 7.9 x 9.1", this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.
The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.
- Padded bag with dimensions of 36.6 x 7.9 x 9.1", designed for carrying a flowtech 75 or TT tripod with an FSB fluid head
- 900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps
- Full-length zipper allows for easy access to the interior compartment
- Connecting hand straps, side handles, and D-rings available for transport
- Clear plastic window on one of the sides allows you to insert a name tag for easy identification
Items Included :
Sachtler FSB 4 Fluid Head
- Sachtler Pan Handle DV 75
- Sachtler Sideload Plate S/Ace Tripod QR Plate
- Limited 1-Year Warranty, Extendable to 2 Years with Product Registration
Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet
- Sachtler Mid-Level Spreader for FlowTech 75
- 3 x Sachtler Rubber Feet for flowtech Tripod (Set of 3)
- Sachtler Attachment Mount for flowtech 75 Tripod
- Vinten Carry Handle for flowtech 75/100mm Tripod
- Limited 1-Year Warranty, Extendable to 2-Years with Product Registration
Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head
- Limited 1-Year Warranty
- Limited 2-Year Warranty Extension upon Online Registration