SWIT S-2051 Chip Array LED On-camera Light

The S-2051 on-camera LED light adopts the new generation LED technology called Chip Array LED, which integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, glareless light, similar to the traditional Halogen bulb light.S-2051 feeds 40W light output, and equivalent to a 200W halogen bulb. The illuminance is 3000 Lux at 1 meter distance and 1 meter scale.

The traditional LED lights use lens to converge and get a higher brightness, but dropped down quickly around, which will generate a visible lighting border in the image. In comparison, the Chip Array LED generates a wider beam angle, equally spread from the center to edge, and suitable for HD shooting.

The traditional LED array always generates several highlight pots on retina and people will feel glaring, even can’t recover sight until a few seconds. In comparison, the SWIT Chip Array LED has only one bulb in appearance, and output a glareless, single shadow light, suitable for close interview shooting.

The S-2051 LED has 5000K color temperature and also equipped with a 5600K (Daylight) and a 3200K (Tungsten) color temperature filter. You can switch the color temperature easily.The S-2051 accepts 11-17V voltage input, and goes with a D-tap to pole-tap cable (S-7104), to plug into the DC-IN port of S-2051 and get power from D-tap power output sockets, such as batteries, battery plates, or camera handle. 11-17V D-tap Power Supply.

S-2051 has a dimmer controller to adjust the light output from 10%-100%. The color temperature will not change during the dimmer controlling. S-2051 can be fixed on camera via 1/4” screw head, and the package also goes with a spare cold shoe part for users to change the screw connector to cold shoe.